| Code | STL | Printed |
|---|---|---|
| cqindustry |
- Parts - 25, 3 ring ladders, 2 ring conduits, 1 single platform, 2 double platforms, 1 chip container, 1 large chip container, 1 pipe walkway, 6 railings, 4 large railings, 3 ring pipes, 1 pipe cap
- Base Length - 300mm
- Base Width - 150mm
- Height - 290mm
- Weight - 317 grams
- Print Time - 1 day 18 hours 4 minutes
- Layer Height - 0.2mm
- Infill - 10%
- Length - 150mm
- Width - 150mm
- Height - 4mm
- Weight - 39grams
- Print Time - 5 hours 19 minutes
- Layer Height - 0.2mm
- Infill - 10%
- No Supports
- Length - 150mm
- Width - 300mm
- Height - 4mm
- Weight - 85grams
- Print Time - 10 hours 13 minutes
- Layer Height - 0.2mm
- Infill - 10%
- No Supports
- I printed on a printer with a build size of 300mm x 300mm
- when turned diangonally the print size is 276mm by 276mm
- Length - 86mm
- Width - 87.2mm
- Height - 71mm
- Weight - 12grams
- Print Time - 2 hours 12 minutes
- Layer Height - 0.2mm
- Infill - 10%
- No Supports
- Length - 86mm
- Width - 89.2mm
- Height - 71mm
- Weight - 17grams
- Print Time - 2 hours 25 minutes
- Layer Height - 0.2mm
- Infill - 10%
- No Supports
Collection of greebles made by RobertusMaximus and some of the vents were made by me. https://miniforall.com/ventgreebles
- Weight - 38grams
- Print Time - 6 hours 27 minutes
- Layer Height - 0.2mm
- Infill - 10%
- No Supports
Has a cutout for the chiptower ring and is sized to fit in between floors.
- Length - 71mm
- Width - 23mm
- Height - 23.5mm
- Weight - 9grams
- Print Time - 1 hour 2 minutes
- Layer Height - 0.2mm
- Infill - 10%
- Printed with supports, or in a standing orientation with no supports
- Length - 23.5mm
- Width - 23mm
- Height - 23.5mm
- Weight - 3grams
- Print Time - 32 minutes
- Layer Height - 0.2mm
- Infill - 10%
- No Supports
- Length - 75mm
- Width - 70.5mm
- Height - 24.5mm
- Weight - 22grams
- Print Time - 3 hours 11 minutes
- Layer Height - 0.2mm
- Infill - 10%
- No Supports
- Length - 90mm
- Width - 75mm
- Height - 26mm
- Weight - 4grams
- Print Time - 31 minutes
- Layer Height - 0.2mm
- Infill - 10%
- Printed with supports touching build plate only
- Length - 240mm
- Width - 7mm
- Height - 26mm
- Weight - 10grams
- Print Time - 1 hour 31 minutes
- Layer Height - 0.2mm
- Infill - 10%
- Printed with supports touching build plate only
*Note the rails attach to the platform, your choice if you want to glue or not. In general friction should be enough.
The pipes in this set are compatible with the following kits.
| Code | STL | Printed |
|---|---|---|
| cqindustry |