Pipe Terrain Set

Pipe / Power Line terrain Set. Designed and written in cadquery.
The set is designed to be modular using magnets.

Printed without supports

• Cleaned up using a pinvice
• 3mm x 2mm magnets
• Hot glue to set the magnets

• Parts - 22 printed + 76 magnets = 98
  • 6 Straight
  • 2 Curved Left 60°
  • 2 Curved Right 60°
  • 4 90° degree Turn
  • 4 Head Caps
  • 1 Platform Pipe
  • 1 Damaged Straight Pipe
  • 1 2-Section Damaged Straight Pipe
• Weight - 115 grams
• Print Time - 23 hours 17 minutes
• Layer Height - 0.2mm
• Infill - 10%
• No Supports

• Length - 75mm
• Width - 23mm
• Height - 23.5mm
• Weight - 9grams
• 4 Magnets
• Print Time - 1 hour 18 minutes
• Layer Height - 0.2mm
• Infill - 10%
• No Supports

• Length - 74.9mm
• Width - 54.7mm
• Height - 23.5mm
• Weight - 10grams
• 4 Magnets
• Print Time - 1 hour 23 minutes
• Layer Height - 0.2mm
• Infill - 10%
• No Supports

Two parts are needed for the curve because the outline of the pipe is asymetrical

• Length - 74.9mm
• Width - 54.7mm
• Height - 23.5mm
• Weight - 10grams
• 4 Magnets
• Print Time - 1 hour 24 minutes
• Layer Height - 0.2mm
• Infill - 10%
• No Supports

• Length - 23.5mm
• Width - 23mm
• Height - 23.5mm
• Weight - 3grams
• Print Time - 32 minutes
• Layer Height - 0.2mm
• Infill - 10%
• No Supports

• Length - 23mm
• Width - 23mm
• Height - 5mm
• Weight - 1grams
• Print Time - 13 minutes
• Layer Height - 0.2mm
• Infill - 10%
• No Supports

• Length - 75mm
• Width - 70.5mm
• Height - 24.5mm
• Weight - 22grams
• Print Time - 3 hours 11 minutes
• Layer Height - 0.2mm
• Infill - 10%
• No Supports

• Length - 75mm
• Width - 23mm
• Height - 23.5mm
• Weight - 9grams
• Print Time - 1 hours 29 minutes
• Layer Height - 0.2mm
• Infill - 10%
• No Supports

• Length - 77mm
• Width - 23mm
• Height - 23.5mm
• Weight - 11grams
• Print Time - 1 hours 46 minutes
• Layer Height - 0.2mm
• Infill - 10%
• No Supports

One interesting feature of the pipes is that they can be used in a vertical orientation.