Code | STL | Printed |
---|---|---|
cqterrain | cults3d | Etsy Walkway Set |
printables | ||
thingiverse | ||
Maker World | ||
Maker Online |
I modeled three different walkways in two different styles using CadQuery.
Suitable for miniature wargaming.
https://www.youtube.com/watch?v=BU3Nbdt-cx0
The tabs and the ends of the walkways will require support matrial.
The Bridge is 9 inches or 235 mm long.
I have to print that part diagonally on the print bed.
- Length - 235mm
- Width - 75mm
- Height - 46mm
- Weight - 78grams
- Print Time - 11 hours 20 minutes
- Layer Height - 0.2mm
- Infill - 10%
- Printed Supports for the tabs
- Length - 160mm
- Width - 50mm
- Height - 26mm
- Weight - 35grams
- Print Time - 5 hours 35 minutes
- Layer Height - 0.2mm
- Infill - 10%
- Printed Supports for the tabs
- Length - 85mm
- Width - 50mm
- Height - 8mm
- Weight - 14grams
- Print Time - 2 hours 7 minutes
- Layer Height - 0.2mm
- Infill - 10%
- Printed Supports for the tabs
- Length - 235mm
- Width - 75mm
- Height - 46mm
- Weight - 84grams
- Print Time - 11 hours 43 minutes
- Layer Height - 0.2mm
- Infill - 10%
- Printed Supports for the tabs
- Length - 160mm
- Width - 50mm
- Height - 26mm
- Weight - 36grams
- Print Time - 5 hours 21 minutes
- Layer Height - 0.2mm
- Infill - 10%
- Printed Supports for the tabs
- Length - 85mm
- Width - 50mm
- Height - 8mm
- Weight - 15grams
- Print Time - 2 hours 2 minutes
- Layer Height - 0.2mm
- Infill - 10%
- Printed Supports for the tabs
Code | STL | Printed |
---|---|---|
cqterrain | cults3d | Etsy Walkway Set |
printables | ||
thingiverse | ||
Maker World | ||
Maker Online |