Dollhouse

Built a dollhouse for my kids.
First Large Project I did with Cadquery, and first large project on my printer.
I went ambitious.

• Length - 479mm
• Width - 175mm
• Height - 450mm
• Weight - 2,213grams
• Print Time - 14 days 1 hours 46 minutes
• Layer Height - 0.2mm
• Infill - 10%
• no supports

I modeled a full house with a front and back. I printed the front half of the house, which took about three weeks on one printer.

If there's interest in the stls for the full project let me know.

I like the modularity of having the pieces separate. At first I opted for using a primitive clip. Later I drilled in magnet holes.

• Intro
• Stones
• Windows

The only difference between left and right roof pieces is tile placement.

• Length - 185mm
• Width - 185mm
• Height - 100mm
• Weight - 225grams
• Print Time - 1 day 16 hours 45 minutes
• Layer Height - 0.2mm
• Infill - 10%
• no supports

The only difference between left and right roof pieces is tile placement.

• Length - 185mm
• Width - 185mm
• Height - 100mm
• Weight - 225grams
• Print Time - 1 day 16 hours 41 minutes
• Layer Height - 0.2mm
• Infill - 10%
• no supports

• Length - 125mm
• Width - 185mm
• Height - 100mm
• Weight - 204grams
• Print Time - 1 day 9 hours 21 minutes
• Layer Height - 0.2mm
• Infill - 10%
• no supports

• Length - 176.5mm
• Width - 176.5mm
• Height - 175mm
• Weight - 276grams
• Print Time - 1 day 15 hours 33 minutes
• Layer Height - 0.2mm
• Infill - 10%
• no supports

• Length - 125mm
• Width - 176.5mm
• Height - 175mm
• Weight - 221grams
• Print Time - 1 day 9 hours 21 minutes
• Layer Height - 0.2mm
• Infill - 10%
• no supports

• Length - 176.5mm
• Width - 176.5mm
• Height - 175mm
• Weight - 277grams
• Print Time - 1 day 15 hours 33 minutes
• Layer Height - 0.2mm
• Infill - 10%
• no supports

• Length - 177mm
• Width - 177mm
• Height - 175mm
• Weight - 281grams
• Print Time - 1 day 16 hours 5 minutes
• Layer Height - 0.2mm
• Infill - 10%
• no supports

• Length - 125mm
• Width - 175mm
• Height - 175mm
• Weight - 224grams
• Print Time - 1 day 6 hours 3 minutes
• Layer Height - 0.2mm
• Infill - 10%
• no supports

• Length - 177mm
• Width - 177mm
• Height - 175mm
• Weight - 280grams
• Print Time - 1 day 16 hours 24 minutes
• Layer Height - 0.2mm
• Infill - 10%
• no supports

• Length - 185mm
• Width - 185mm
• Height - 100mm
• Weight - 277grams
• Print Time - 1 day 21 hours 50 minutes
• Layer Height - 0.2mm
• Infill - 10%
• no supports